I don’t have any co2 and I’m playing around with it. Will it hurt it?
Hehe, answering your question again I guess.
The answer is no. It does not hurt your paintball gun to fire it without any gas, be it CO2 or HPA. All you’re really doing is manually pulling back on the hammer after each fire, an action that would be done automatically if there was pressure in the gun.
Maybe after a few thousand shots you’ll need to re-oil the internal parts. This is rather easy to do. All you’ll need is a small bottle of synthetic oil (not motor oil). Squirt a few drops into the ASA, tilt the gun around to get it to drip down into the hose and into the gun, connect your CO2 tank, and fire a couple of times. The gas forces the oil up and through the gun.
And to answer your previous question on where to fill up CO2 tanks, that really depends on your area. Some sporting good stores can do it such as Academy and Dicks Sporting Goods, but those stores are regional and not in every state or country. Any paintball store can refill a CO2 tank (or at least any paintball store worth a damn).
Just to add onto that, If you’re sure you want to use CO2, then you might want to look into getting a larger tank. Preferably a 20 ounce tank. Here’s the breakdown of how many shots you get per tank:
9oz = 300-500
12oz = 700-900
20 oz = 800-1000
The typical hopper holds about 150 to 200 paintballs. So using a 9 ounce tank you’ll be good on that. But if you ever want to bring more ammo with you on the field, you’ll probably need a larger tank.
Also note that whenever a CO2 tank is filled, it gets cold. Really cold. It’ll eventually warm back up to room temperature, but CO2 is a funny gas in that it gets cold when compressed and it gets cold again when it expands.
One of the many reasons why I don’t like CO2 is that it destroys O-rings. It destroys them by freezing them and they shatter like glass. You’ll need a moderate supply of spare tank O-rings to keep handy because they’ll shatter into pieces from time to time.They’re relatively inexpensive. Last time I checked they’re ten for two dollars or something like that.
Another reason why I don’t like CO2 is that it *can* have a similar effect to O-rings that are inside the gun itself. The gun can get really cold and condensation can start to form on the gun. Condensation in the barrel = water. Water in the barrel = bad news for paintballs.
When paintballs get wet they absorb water and swell up to larger sizes. Sizes that don’t fit your gun or barrel. When that happens, you’ll see a lot more paint breaks inside your gun.
If you have any more questions about Paintball, I’ll be happy to answer them at my email address: redd_18235@yahoo.com
Recent Comments